eSATA & USB 2.0 Combo to Dual SATA RAID Bridge Board ESU2DSATA10

Description

eSATA & USB 2.0 Combo to Dual SATA RAID Bridge Board
ESU2DSATA10
is USB 2.0 & eSATA to dual SATA RAID Bridge Board
ESU2DSATA10
is a selectable hardware RAID Bridge Board with two SATA ports. A true hardware solution,
ESU2DSATA10
requires no software to be installed on your machine.
You can configure the
ESU2DSATA10
to use the following Storage Policies to map the appliance's physical hard drives to virtual drives that are visible to the host computer.
BIG (Concatenation)
JBOD (Just a Bunch Of Disks)
FAST (RAID 0)
SAFE (RAID 1)
SAFE33 (1/3 to SAFE mode and 2/3 to BIG mode)
SAFE50 (1/2 to SAFE mode and 1/2 to BIG mode)
GUI (Use the SteelVine Manager GUI to configure the Storage Policy)
USB 2.0 & eSATA to dual SATA RAID Bridge Board:
Host Link
One eSATA Signal 7pin Receptacle Connector
Serial ATA Gen2m compliance
eSATA and 2-meter cable support
3 Gbps (auto-negotiates to 1.5 Gbps)
Compatible with PM aware and non-PM
aware hosts
Allows multiple drives to be accessed by non-
PM aware drive hosts
Supports NCQ
One eSATA Link&ACT LED
One USB B-Type connector
Complies with USB 2.0 specification
480 Mb/s (can auto-negotiate to 12 Mb/s)
Compatible with OHCI / UHCI / EHCI hosts
Supports up to four LUNs
Supports Mass Storage Class
One USB Link&ACT LED
Device Link
Two SATA Signal 7pin Latch Connector
Serial ATA Gen2m compliance
eSATA and 2-meter cable support
3 Gbps (auto-negotiates to 1.5 Gbps)
Independent 8KB FIFO / Port
Power management capabilities
Supports hot plug
Supports ATAPI & asynchronous notification
Provides device Link and Activity LED (4 pin header) for each SATA port.
Drive Locking
Which helps protect user's data by allowing them to password lock
directly attached and cascaded drives.
Backup Button
ESU2DSATA10 supports single-button backup through third-party
applicationsfor simple and worryifree data protection.
Failure Alarm Buzzer and Switch
Volume degradation (RAID-1) or unavailability (JBOD,Big, Fast)
will be marked by turning on the alarm Buzzer for the node that
experienced this behavior.
eSATA-Based Capacity Expansion
With eSATA-based capacity expansion, the capacity of ESU2DSATA10
enabled appliance can be easily expanded either by adding additional
drives directly or by adding additional ES2DSATA10 enabled devices
in a cascaded topology. These additional drives will dynamically
appear (in BIG, SAFE33 or SAFE50) to the host system as increased
storage capacity in the existing volume.
Payments:
Payments must be made within 3 days of purchase date. Please contact us if you need additional time.
Shipping:
We only ship to the US.
Most orders will ship same day if received by 11am PST. Orders will normally ship within 24 hours.
We do not process or ship on weekends.
Sales tax:
Sales tax if purchasing in the state of CA.
Returns:
We offer a 14 day return if you are not satisfied with your purchase. There is a 10% restocking fee after 14 days. There are no returns after 30 days, only exchanges if item is defective. Buyer pays for return shipping.
Order processing:
Orders are normally processed same day or within 1 business day and shipped within 24 hours.
If you have any questions before or after purchasing, please contact us and we'll be happy to answer them.