5pcs Blind Inner Bearing Puller Hole Remover Extractor Set Slide Hammer Tool Kit

Description

Application:
Bearing Extractor Collets With Internal Capacity From 0.450" (11mm) To 1.260" (32mm)     One Slide Hammer Assemble & Clamp     Open Clamps By Turning Handle Clockwise To Snug Against The Bearing     For Pulling Out Evenly Without Damage The Parts
Fully Chromed Carbon Steel Slide Hammer, 15" (382mm) Overall Length
Description:
5pcs Blind Inner Bearing Puller Hole Remover Extractor Set Slide Hammer Tool Kit
Application:
Bearing Extractor Collets With Internal Capacity From 0.450" (11mm) To 1.260" (32mm)
One Slide Hammer Assemble & Clamp
Open Clamps By Turning Handle Clockwise To Snug Against The Bearing
For Pulling Out Evenly Without Damage The Parts
Fully Chromed Carbon Steel Slide Hammer, 15" (382mm) Overall Length
Description:
2lb Slide Hammer (950grams)
Bearing Extractor Collets With Internal
Capacity From 0.450" (11mm) To 1.260" (32mm)
Drop Forged Steel
One Slide Hammer Assemble & Clamp .
Open Clamps By Turning Handle Clockwise To Snug Against The Bearing
For Pulling Out Evenly Without Damage
The Parts Fully Chromed Carbon Steel
Slide Hammer, 15" (382mm)
Overall Length
Bearing Extractor 1: 3/8" to 1/2" (10mm-14mm)
Bearing Extractor 2: 9/16" to 11/16" (15mm-19mm)
Bearing Extractor 3: 5/8" to 1" (18mm-25mm)
Bearing Extractor 4: 1" to 1-1/4" (25mm-32mm)
Open clamps by turning Handle clockwise to snug against the bearing for pulling out evenly without Damage the parts
5pcs Blind Inner Bearing Puller Hole Remover Extractor Set Slide Hammer Tool Kit
Application:
Bearing Extractor Collets With Internal Capacity From 0.450" (11mm) To 1.260" (32mm)
One Slide Hammer Assemble & Clamp
Open Clamps By Turning Handle Clockwise To Snug Against The Bearing
For Pulling Out Evenly Without Damage The Parts
Fully Chromed Carbon Steel Slide Hammer, 15" (382mm) Overall Length
Description:
2lb Slide Hammer (950grams)
Bearing Extractor Collets With Internal
Capacity From 0.450" (11mm) To 1.260" (32mm)
Drop Forged Steel
One Slide Hammer Assemble & Clamp .
Open Clamps By Turning Handle Clockwise To Snug Against The Bearing
For Pulling Out Evenly Without Damage
The Parts Fully Chromed Carbon Steel
Slide Hammer, 15" (382mm)
Overall Length
Bearing Extractor 1: 3/8" to 1/2" (10mm-14mm)
Bearing Extractor 2: 9/16" to 11/16" (15mm-19mm)
Bearing Extractor 3: 5/8" to 1" (18mm-25mm)
Bearing Extractor 4: 1" to 1-1/4" (25mm-32mm)
Open clamps by turning Handle clockwise to snug against the bearing for pulling out evenly without Damage the parts
Item Specifics
Brand :
topcn-autoparts
Warranty :
1 Year
Manufacturer Part Number :
TA10530AT464PS
UPC :
Does not apply
Type :
Pullers & Separators > Slide Hammer Set
Shipping
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-5 business days.
3.Local pick up is not available.
4.Orders to the rest of world may be shipped out from our warehouse in HongKong.
5.International Buyers C Please Note:
a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying.
Payment
We only accept payment through PayPal. You can open a Paypal account at www.paypal.com.
Returns
1.All of our brand new items come with a 60-Days money-back guarantee.
2.We define the item as defective only if it doesn't function as described, It is the buyer's responsibility to understand the item description before bidding.
3.We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.
5.Shipping& handling cost are not refundable.
6.Man-made damage by abuse or wrong operation is not covered by this warranty.
7.No product liability insurance is assumed.
8.Refunds will be credited within 5 to 7 business days of receiving the return. When we've received and processed the return, we will refund the applicable amount minus any Recovery Fees (See Details Below) for the amount you paid for the item(s), plus any applicable sales tax.
Customer Services
Q: How do I pay for my purchase?
A: MY store accepts PayPal.
Q: When will the item be shipped out?
A: This item will be shipped with 2 business day once payment completed.
Q: Where is my tracking number?
A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
Q: How do I return an item?
A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item.
Feedback
1. We will leave positive feedback once we get your payment.
2. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
3. If you are satisfied with the product you received, please leave us positive feedback and 5 scores DSR.
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Shop Category
Store Home
Ignition Coils
complete struts
Radiator Support
Wheel Hub Bearing
Wheel Adaptor
Exhaust System Parts
Oxygen Sensor
Towing mirrors
Fuel pump assembly
Lift supports
Interior Light
◈  Instrument Light
Starter
Exterior Light
◈  License Plate light
Key or key case
struts
floor mats
wheel lug nuts
Cylinder Piston Gasket Kit
Cylinder Head Gasket Sets
CV Axle
Door handle
Radiator
fastener
LED Lighting
UTV & ATV Brake System Parts
▷  Brake Pads
♢  Sintered Brake Pads
♢  Kevlar Carbon Brake Pads
◈  Brake Shoes
Regulator Rectifier
blower motor fan
blower motor resistor
suspension kit
◈  suspension lixiuxia
◈  suspension cj
◈  suspension gxy
◈  suspension fu
AC Compressor
Brake system
◈  Brake Rotors
◈  Brake Pads
◈  Brake Rotors and Pads
◈  Brake Pad Sensor
◈  Brake Drum
◈  Brake Shoes
cold Cushion seat
Air Suspensions
Nerf Bars & Running Boards
Grilles
Window Switch
Mass Air Flow Sensor-MAF
Window Regulator
Side Fender marker
Alternator
Electrical & Test Equipment
Leveling Lift Kit
Car Cover
Fuel Injector
Automotive Tools
License Plate Frame
Windshield Wiper Motor
Thermostat Housing
Radiator Coolant Tank
Fuel Tank Pipe
Valve Cover
Door Lock Actuator
Power Steering Pump
Timing Solenoid Valve
Electric Water Pump
Timing Chain Kits
Timing Belt Kits
Water Pumps
Oil Pump
Strut Tie Bar
Tire Pressure Sensor
Throttle Body
Harmonic Balancer
Oil Pan
Motorcycle Carburetor
Urea Pump
EGR Valve
Intake Manifold
Cooling Fan
Cooling Fan Clutch
Oil Cooler
Hydraulic Lifter&Roller Lifter
Suspension+Strut+Bearing
Wheel Lock
Gas Can Spout
Starter Relay Solenoid
Cab Marker Light
Head/Fog/Tail Light Assembly
Towing&Hauling
HVAC
ATV Rear Wheel Axle
Parking sensor
Car Antenna
ABS Wheel Speed Sensor
PTO Clutch
Spoilers & Wings
Intake Exhaust Valves
Vacuum Pump
Tensioners
Purge Valve
Knock Sensor
Turbocharger
Clock Spring
Crankshaft Position Sensor
Camshaft Position Sensor
MAP Sensor
Oil Pressure Sensor
Throttle Position Sensor
Stator
Catalytic Converter
idle air control valve
Transfer Case Shift Motor
Secondary Air Injection Pump
Running Board Motor
Clutch Slave Cylinder
Consoles & Parts
Roof rack
Bumper
Tire Pressure Gauge
Steering Rack
Air Diesel Heater
Spark Plug Ignition Wire
Engine Mount
Glow Plug
Air Cleaner Filter Box
Ignition Coil Distributor
Cylinder Piston Kit
LED Package Light
Pressure Tester Gauge
Jack Stands
Tire Changers
Wheel Lug
Sun Visor
window visor
trim tilt motor
wiring harness
ATV Brake Caliper
Car Carburetor
EGR Tube Pipe
Air Intake Hose
Cold Air Intake Kit
Oil Catch Can Tank
Crankcase Vent Valve
Horns
Heater Control Valve
Steering U-Joint
Fuel Shut Off Solenoid
Fuel Cell Tank
Height Level Sensor
Temperature Sensor
Driveshaft
Vacuum Actuator
Air Ride Suspension Valves
Radiator Hose
Release Cable
Ballast module
Rubber Seal Strip
Dipstick
Removal Open Tools
suspension 7 BIN
◈  chenjiao
Camshaft & Crankshaft
ATV Brake Master Cylinder
Rocker Arm
4WD Actuator
Trailer Adapter
Battery Switch
Rotary Vane Vacuum Pump
Throttle Cable Carb Bracket
Oil Filter Wrench
Oil Fuel Hose Line
brake Hose Line
LED headlight Assembly
Instrument Light
LED 3RD Brake Light
headlight motorcycle
Foot Rest Pedal
O Ring
Neutral Safety Switch
Oil Transter Pump
Instrument lights
water Pump Impeller
Strut Mount
A/C Expansion Valve
Wheel Stem Air Valve Cap
Crankcase Breather Filter
Splash Guards & Mud Flaps
Intercooler Pipe Kit
Heater Cores
Evaporators
vehicle speed sensor
RV Water Pump
Fuel Pressure Regulator
Light Bar Mount Bracket
WASTEGATE
Sensor-8
tire cover
CV axle+Brake Pads/Rotors
universal spacer
Steering Shaft
transmission filter
Steering Wheel
Steering Wheel Hub
Steering Gear Box
Hydraulic Hand Brake
snorkel air intake
CDI BOX
Proportioning Valve
Alternator Bracket Kit
Spindle
Window Glass Hinge
Other Golf Cart Parts
Intercoolers
Crankshaft Pulley
Steering Knuckle
Recoil Starter Pull Start
4 pcs wheel hub bearing
ATV Tires
Tire Inflator Air Pump
Brake Line Lock Kit
Fender Flares
jumper cable
Hood Latch Lock
Other Handlebars & Levers
Tonneau Cover
Bug Shield
Front Bumper Lip
dash cover
primary drive clutch
air check valve
golf
Brake Line Tubing Kit
Jack Plate
Kick Start Starter Lever
carburetor intake mainfold
Fuel Switch Valve
Garden Water Pump
Switch Panel
air vent
Car Window Film Tint Tools
Windshields
Ignition Wires
Lower Kits & Parts
Cargo Cover
Leaf Springs
Shift Knobs & Boots
Other Motorcycle Parts
Hub Caps
Motorcycle Exhaust Pipe
ATV Ignition Switch
fog lights
Rear View Camera
Jeep Wrangler Headlights
Pivot Brake Clutch Lever
Power Brake Booster
Other
Hot Item
2X Front Wheel Hub & Bearing Assembly For Chevrolet Impala Pontiac Grand Prix
USD 47.21
2 Front Hood Lift Supports Struts Shocks For Dodge Ram 1500 2500 3500 4500 5500
USD 24.41
2 Front Hood Gas Lift Supports Strut Shocks Spring For Dodge Ram 02 -10 4364
USD 24.88
For Ford F-150 Expedition 5.4L 4.6L Explorer Lincoln DG508 Ignition Coil 8 Pack
USD 35.99
2X Uncut Replacement Key Fob Keyless Entry Remote Transmitter for dodge charger
USD 22.79
New List Item
Power Window Regulator fits 2003-2008 Toyota Corolla Front Left w/o Motor
USD 33.59
2 New Front Steering Tie Rod End Adjusting Sleeves for Ford Lincoln ES3368S
USD 19.36
Fuel Injection Pressure Regulator For BMW 325i 323i 323Ci 323is 323ti M3 750iL
USD 14.56
Power Window Regulator Switch fits 2004 Chevy Colorado Front Left w/ Motor
USD 66.14
6pcs Front Lower Ball Joint Outer Tie Rod Sway Bar For 2005-2012 Nissan Xterra
USD 46.53
5pcs Blind Inner Bearing Puller Hole Remover Extractor Set Slide Hammer Tool Kit
Application:
Bearing Extractor Collets With Internal Capacity From 0.450" (11mm) To 1.260" (32mm)
One Slide Hammer Assemble & Clamp
Open Clamps By Turning Handle Clockwise To Snug Against The Bearing
For Pulling Out Evenly Without Damage The Parts
Fully Chromed Carbon Steel Slide Hammer, 15" (382mm) Overall Length
Description:
2lb Slide Hammer (950grams)
Bearing Extractor Collets With Internal
Capacity From 0.450" (11mm) To 1.260" (32mm)
Drop Forged Steel
One Slide Hammer Assemble & Clamp .
Open Clamps By Turning Handle Clockwise To Snug Against The Bearing
For Pulling Out Evenly Without Damage
The Parts Fully Chromed Carbon Steel
Slide Hammer, 15" (382mm)
Overall Length
Bearing Extractor 1: 3/8" to 1/2" (10mm-14mm)
Bearing Extractor 2: 9/16" to 11/16" (15mm-19mm)
Bearing Extractor 3: 5/8" to 1" (18mm-25mm)
Bearing Extractor 4: 1" to 1-1/4" (25mm-32mm)
Open clamps by turning Handle clockwise to snug against the bearing for pulling out evenly without Damage the parts
Item Specifics
Brand :
topcn-autoparts
Warranty :
1 Year
Manufacturer Part Number :
TA10530AT464PS
Type :
Pullers & Separators > Slide Hammer Set
Shipping
Payment
Returns
Customer Services
Feedback
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-5 business days.
3.Local pick up is not available.
4.Orders to the rest of world may be shipped out from our warehouse in HongKong.
5.International Buyers C Please Note:
a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying.
We only accept payment through PayPal. You can open a Paypal account at www.paypal.com.
1.All of our brand new items come with a 60-Days money-back guarantee.
2.We define the item as defective only if it doesn't function as described, It is the buyer's responsibility to understand the item description before bidding.
3.We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.
5.Shipping& handling cost are not refundable.
6.Man-made damage by abuse or wrong operation is not covered by this warranty.
7.No product liability insurance is assumed.
8.Refunds will be credited within 5 to 7 business days of receiving the return. When we've received and processed the return, we will refund the applicable amount minus any Recovery Fees (See Details Below) for the amount you paid for the item(s), plus any applicable sales tax.
Q: How do I pay for my purchase?
A: MY store accepts PayPal.
Q: When will the item be shipped out?
A: This item will be shipped with 2 business day once payment completed.
Q: Where is my tracking number?
A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
Q: How do I return an item?
A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item.
1. We will leave positive feedback once we get your payment.
2. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
3. If you are satisfied with the product you received, please leave us positive feedback and 5 scores DSR.
Copyright of Topcn-autoparts. All rights reserved.